Lab Extruder

SHR-800A Mixer

1、Name：High speed mixer

2、Quantity：1set

3、Model：SHR-800A　　　　　　　　　　　　　　　　　　　

1）Stirring tank　　　　　　　　　　　　　　　　　　　　　　　　　

A、Total volume：800L，Effective volume600L，feeding quantity one time：220Kg

B、Shape：Round pallet bottom

C、Inner barrel：SUS304，δ＝10mm，250＃ polishing

D、Outer barrel：Q235-A，δ＝2mm，

E、Barrel top circle flange ：SUS304，δ＝22mm，250＃polishing

2）Stirring wing 　　　　　　　　　　　　　　　　　　　　　　　　

A、Material：SUS304， 250＃polishing

B、Stirring wing speed：370/740rpm

C、Stirring wing construction：made from top side wing, middle side wing and bottom side wing 

　　Blade made of SUS304

3）Barrel cover and lifting parts　　　　　　　　　　　　　　　　　　　　

A、Barrel cover material：ZL102，inner surface 200＃polishing 

B、Sealing: cover sealing parts adopt two lines white silica rubber sealing  

C、On the barrel cover equipped with feeding mouth and vent 

4）Foundation 　　　　　　　　　　　　　　　　　　　　　　　

A、Construction：fixable stirring tank and motor and also equipped with belt tighten device

B、Panel material ：Made of  Q235-A，δ＝20mm

C、Pot bottom material：made of HT200

D、Frame material ：Q235-A

F、Surface was sprayed paint 

5）Material discharging device　　　　　　　　　　　　　　　　　　　　　　

A、Material：Made of  ZL102，200＃polishing 

B、Construction：Pneumatically  open ，equipped with observing hole and air blowing hole, valve limit opening and so on

C、Discharging cover material：ZL102

D、Discharging valve material：SUS304

6）Motor 　　　　　　　　　　　　　　　　　　　　　　　　　　

A、Model：YD315L-8/4V1（AC 380V，50HZ）,AC motor

B、Power：83/110KW

C、Rotary speed：740/1480rpm

7）Bearing sealing parts　　　　　

A、Oil sealing ＋labyrinth seal ring 

B、Oil sealing made of nature rubber 

C、Air blows from seal ring to stirring tank.This kind of design stops the material getting into the sealing parts 

D、Bearing adopts NSK

8）Electric apparatus　　　　　　　　　　　　　　　　　　　　　　

A、Main apparatus adopt Suzhou Siemens ， RKC temperature controller （Japan）

B、Main motor adopts time relay, max time :15minutes .

C、Electric box separately made and adopts easy dust-proof device 

D、Electric control panel: on panel :electric lights ,running switch  ,auto running switch (with  time recorder );

          In panel : residual current operated protective devices, pneumatic switch, relay, fuse terminal ,and so on

F、Air panel: on panel :Pneumatic valve, terminal table ;others :regulator, manual ball valve 

9）Safety device　　　　　

A、On the main motor equipped touching switch and this kind of design ensures that when the cover closes then the stirring wing can rotate  .

B、On the discharging valve there is a touching switch and this kind of design ensures that when the cover closes then the stirring wing can rotate  

10）Other parts（include bearing、belt、feeding hopper and other parts）　　　

Product Categories : Extruder Ancillary Machinery